December 1st, 2026

How to Build a Merit Matrix

How to Build a Merit Matrix

Written by

Avatar of author

Carmen Olmetti

Merit Increases

2027 Merit Cycle

How the grid works, the five choices to make before you build it, and how to apply it to sales roles.

This post is part of our Merit Increases series. It goes deeper into the Merit Matrix section in Merit Increases for Sales Teams: How to Run the 2027 Cycle, and it draws on our field guide, Merit Practices for Sales Populations.

The Short Answer

The Short Answer

A merit matrix is a grid that sets each person’s increase from two inputs: their performance rating and their position in their salary range. The same rating earns more below midpoint and less above it, so the matrix rewards performance while moving pay toward the market. For sales roles, the percentage is applied to on-target earnings (OTE).

How a Merit Matrix Works

How a Merit Matrix Works

Performance runs down one side of the grid, usually on a five-point scale. Position in range runs across the top, often split into below, at, and above midpoint. Where the two meet is the recommended increase.

The anchor cell is a rating of 3 at midpoint, which gets the budget. With a 4 percent budget, a solid performer paid at the market rate receives 4.0 percent, and every other cell is set around that point.

An Illustrative Merit Matrix

An Illustrative Merit Matrix

Here is an example at a 4 percent focal budget, with performance on a five-point scale.

Illustrative Merit Matrix at a 4 percent focal budget, with ratings from 1 to 5 and position below, at and above midpoint

Read it with a real case. A rep rated 4 who sits below midpoint earns 6.0 percent, while a rep with the same rating above midpoint earns 4.0 percent. Both are rewarded for strong work, and the first one also moves closer to the market rate.

The Two Inputs That Drive the Matrix

The Two Inputs That Drive the Matrix

Performance Rating

Performance Rating

The rating needs to mean the same thing on every team. Managers calibrate ratings before anyone talks about money, so a 4 in one region carries the same weight as a 4 in another.

For sales, a common weighting is 40 percent results, 30 percent leadership, and 30 percent operational excellence. Quota attainment already pays through the incentive plan, so the rating also looks at how results were achieved, and our talent strategy work uses 12 sales competencies to keep those ratings consistent.

Position in Range

Position in Range

Position in range shows where pay sits between the minimum and maximum of the salary range. Compa ratio, which is pay divided by the range midpoint, is the usual way to measure it.

Where people sit in a typical salary range and what merit should do for them

In a typical range, 10 to 15 percent of people sit below the first quartile, 70 to 80 percent sit in the middle two quartiles, and 10 to 15 percent sit above the third quartile. The matrix gives each group a clear job: development, retention, or a path to promotion.

Five Choices to Make Before You Build It

Five Choices to Make Before You Build It

1. How the Pool Is Funded

1. How the Pool Is Funded

Some companies fund merit entirely from company results, some entirely from individual performance, and many split it. The illustrative matrix above weights the two equally, 50/50.

2. How Many Rating Levels and Range Bands

2. How Many Rating Levels and Range Bands

Five ratings and three range bands are the most common setup. More bands give finer control, and fewer bands are easier for managers to explain to their teams.

3. How Calibration Runs

3. How Calibration Runs

Calibration means managers compare ratings across teams so the same performance gets the same rating. For example, two sales managers each want to rate their top rep a 5. In calibration, they compare attainment, pipeline, and customer feedback side by side and agree that one rep earns a 5 and the other a 4 before setting any increase.

4. How Far Managers Can Move Off the Grid

4. How Far Managers Can Move Off the Grid

Most companies treat anything outside the grid as an exception that needs a reason and an approver. For example, a manager wants to give 7 percent to a rep with a competing offer when the matrix says 5 percent. The extra 2 percent goes through as a documented retention exception, approved by compensation and finance, so it shows up in next year’s planning.

The merit timeline: calibrate ratings, apply the Merit Matrix, document exceptions, review total pay, with owners and partners

5. Whether Every Role Has a Salary Range

5. Whether Every Role Has a Salary Range

The matrix measures position in range, so every role needs a salary range behind it. In the Radford Global Sales Survey, about one in five companies had no formal range for field sales reps or managers, and about one in three had none for sales executives. Our guides to reading benchmark data and applying it to career architecture cover how to set ranges up.

What the Matrix Does Well, and Where It Needs Support

What the Matrix Does Well, and Where It Needs Support

The matrix is popular for good reasons. It is easy to explain to managers and employees, keeps spending within budget, and builds the market correction into every increase. It also gives a consistent, documented reason for each number, which matters more now that pay ranges are posted.

It also needs a few things to work well. Ratings must be calibrated, every role needs a real salary range, and managers need a clear path for cases the grid can’t capture, such as a flight risk or someone at the top of the range.

Other Approaches Companies Use

Other Approaches Companies Use

  • Guideline ranges. Each cell holds a range, such as 3.5 to 4.5 percent, and managers choose within it. This gives managers more room while keeping the overall shape.

  • Performance-only guidelines. Increases follow the rating alone, and market corrections are handled separately. This works best when ranges are well maintained, and most people sit near midpoint.

  • Lump sum awards. People at or above the range maximum receive part or all of their increase as a one-time payment, so they are rewarded without pushing base pay past the range.

  • Manager discretion within a pool. Each manager gets a pool and allocates it with light guidance. This suits small teams and companies managing total compensation, with strong calibration to keep it fair.

Many companies blend these. A matrix for most of the population, lump sums for people above the range maximum, and a pool for small teams is a common mix.

Applying the Matrix to Sales Roles

Applying the Matrix to Sales Roles

For quota-carrying roles, the matrix percentage is applied to OTE at focal and split back to base and target incentive at the role’s pay mix. A 4 percent increase on a $150,000 OTE at 50/50 adds $3,000 to base and $3,000 to target incentive.

That keeps the pay mix where the plan design put it. Our post on merit for quota-carrying roles covers the rest of the sales treatment, and 2027 merit increase budgets cover how to size the pool the matrix spends.

Our Perspective

A merit matrix works best as a shared language between HR, finance, and sales. Calibrate ratings first, keep a salary range behind every role, record every exception, and apply the percentage to OTE for sales. Managers then spend their time on their people, and the grid handles the arithmetic.

Frequently Asked Questions

Frequently Asked Questions

What is a merit matrix?

What is a merit matrix?

A merit matrix is a grid that sets each employee’s increase based on their performance rating and their position in their salary range. Higher ratings earn larger increases, and people below midpoint receive more than people above it at the same rating.

What should a merit matrix pay at midpoint?

What should a merit matrix pay at midpoint?

A rating that meets expectations at midpoint usually receives the budget. With a 4 percent budget, that cell is 4.0 percent, and the rest of the grid is set around it.

How do you handle employees above the range maximum?

How do you handle employees above the range maximum?

Many companies pay part or all of the increase as a lump sum, so strong performers are rewarded without pushing base pay past the range. A promotion review is often the better long-term answer for people consistently above the maximum.

Where This Fits

Where This Fits

This post is part of our Merit Increases series, anchored by Merit Increases for Sales Teams: How to Run the 2027 Cycle and built on the Merit Practices for Sales Populations guide. For the governance around exceptions, see sales compensation administration and governance.

The Takeaway

The Takeaway

A merit matrix turns one budget into fair, explainable increases. Build it from calibrated ratings and real salary ranges, decide in advance how exceptions work, and apply the percentage to OTE for sales. The grid then rewards performance and keeps pay moving with the market in a single step.

Get the field guide

Merit Practices for Sales Populations, the full field guide behind this series.

Explore the model

How compensation design scales as your company grows.

Work with us

Talk to our team about your 2027 merit cycle.

About the author. Carmen Olmetti is Founding Partner of RevEng Consulting. He led sales incentive compensation strategy globally at SAP and revenue operations for LinkedIn’s $7B media business.

Sources

Radford Global Sales Survey, Sales Practices Report, Technology, May 2021, read as directional; RevEng sales talent strategy framework. Matrix values and the 50/50 weighting are illustrative and drawn from the RevEng Merit Practices for Sales Populations guide.

Ready to Rev?

At RevEng Consulting, we don’t believe in one-size-fits-all solutions. With our Growth Excellence Model (GEM), we partner with you to design, implement, and optimize strategies that work.

Ready to take the next step? Let’s connect and build the growth engine your business needs to thrive.

Ready to Rev?

At RevEng Consulting, we don’t believe in one-size-fits-all solutions. With GEM, we partner with you to design, implement, and optimize strategies that work. Whether you’re scaling your business, entering new markets, or solving operational challenges, GEM is your blueprint for success.


Ready to take the next step? Let’s connect and build the growth engine your business needs to thrive.

Ready to Rev?

At RevEng Consulting, we don’t believe in one-size-fits-all solutions. With GEM, we partner with you to design, implement, and optimize strategies that work. Whether you’re scaling your business, entering new markets, or solving operational challenges, GEM is your blueprint for success.


Ready to take the next step? Let’s connect and build the growth engine your business needs to thrive.

Get started on a project today

Reach out below and we'll get back to you as soon as possible.

CHICAGO | HOUSTON

©2026 All Rights Reserved RevEng Consulting

Get started on a project today

Reach out below and we'll get back to you as soon as possible.

CHICAGO | HOUSTON

©2026 All Rights Reserved RevEng Consulting